The company has 9 anodized coloring, can handle up to 13 meters, and 2 electrophoretic painting production lines, which can handle 13 meters profiles.
The company has introduced one powder coating production line from Switzerland, one fluorine carbon production line in France and one wood grain production line. The powder has a short color change time, high powder recovery rate, uniform coating, no sag phenomenon, and a continuous, smooth coating film on the tip and rough surface of the workpiece. The curing oven temperature difference is less than or equal to ±2.5 °C, can handle profiles up to 13 meters, using high-quality raw materials and strict process control, so that the spray products maintain the same color, uniform film thickness and rich color, providing designers with a Broad design space.
The thermosetting resin powder used by the company is purchased from the world famous brand AKZONOBEL powder coating company. The raw materials for the production of powder are all imported from abroad, and the manufacturer provides the “guarantee book” for the corresponding weathering period. The adhesion, weather resistance and peeling resistance of the aluminum powder coating layer The ability and UV resistance are strong, and the surface treatment of aluminum profiles is unmatched.
The company has 5 domestic advanced level of melting and casting production lines, using on-line addition of aluminum-titanium-boron wire on-line refining, and using online degassing and multi-stage foam ceramic filter plate purification device. Compared with traditional melting and casting equipment, the advantages are as follows:
1. Gas consumption 70-80kg/t.Al
2. Burning 1.0-.5%
3. The production efficiency is doubled, and the use of forklift feeding, mechanical slag removal, etc., effectively reduce labor intensity.
4. The temperature difference in the furnace is less than or equal to ±5 °C.
5. Adopting the direct reading spectrometer introduced in the UK, strictly in accordance with AA standard, ALCOA standard, ALCAN standard or customer specified chemical composition standard, to ensure the homogenization and crystal formation of aluminum rod melting and casting products to ensure a reasonable proportion of alloy composition, raw materials The domestic and international high-quality A00 aluminum ingots are selected from the five major aluminum plants in China. At present, the casting workshop can produce various alloy grades such as 6061, 6063, 6005, 6082, 3003, etc., to meet the needs of customers’ alloy types. The specifications of ingots that can be produced are Φ254, Φ150, Φ120, Φ105, Φ90 and so on.
The company has 9 anodized coloring, can handle up to 13 meters, and 2 electrophoretic painting production lines, which can handle 13 meters profiles.
The company has introduced one powder coating production line from Switzerland, one fluorine carbon production line in France and one wood grain production line. The powder has a short color change time, high powder recovery rate, uniform coating, no sag phenomenon, and a continuous, smooth coating film on the tip and rough surface of the workpiece. The curing oven temperature difference is less than or equal to ±2.5 °C, can handle profiles up to 13 meters, using high-quality raw materials and strict process control, so that the spray products maintain the same color, uniform film thickness and rich color, providing designers with a Broad design space.
The thermosetting resin powder used by the company is purchased from the world famous brand AKZONOBEL powder coating company. The raw materials for the production of powder are all imported from abroad, and the manufacturer provides the “guarantee book” for the corresponding weathering period. The adhesion, weather resistance and peeling resistance of the aluminum powder coating layer The ability and UV resistance are strong, and the surface treatment of aluminum profiles is unmatched.
The company has 5 domestic advanced level of melting and casting production lines, using on-line addition of aluminum-titanium-boron wire on-line refining, and using online degassing and multi-stage foam ceramic filter plate purification device. Compared with traditional melting and casting equipment, the advantages are as follows:
1. Gas consumption 70-80kg/t.Al
2. Burning 1.0-.5%
3. The production efficiency is doubled, and the use of forklift feeding, mechanical slag removal, etc., effectively reduce labor intensity.
4. The temperature difference in the furnace is less than or equal to ±5 °C.
5. Adopting the direct reading spectrometer introduced in the UK, strictly in accordance with AA standard, ALCOA standard, ALCAN standard or customer specified chemical composition standard, to ensure the homogenization and crystal formation of aluminum rod melting and casting products to ensure a reasonable proportion of alloy composition, raw materials The domestic and international high-quality A00 aluminum ingots are selected from the five major aluminum plants in China. At present, the casting workshop can produce various alloy grades such as 6061, 6063, 6005, 6082, 3003, etc., to meet the needs of customers’ alloy types. The specifications of ingots that can be produced are Φ254, Φ150, Φ120, Φ105, Φ90 and so on.
The company has 9 anodized coloring, can handle up to 13 meters, and 2 electrophoretic painting production lines, which can handle 13 meters profiles.
The company has introduced one powder coating production line from Switzerland, one fluorine carbon production line in France and one wood grain production line. The powder has a short color change time, high powder recovery rate, uniform coating, no sag phenomenon, and a continuous, smooth coating film on the tip and rough surface of the workpiece. The curing oven temperature difference is less than or equal to ±2.5 °C, can handle profiles up to 13 meters, using high-quality raw materials and strict process control, so that the spray products maintain the same color, uniform film thickness and rich color, providing designers with a Broad design space.
The thermosetting resin powder used by the company is purchased from the world famous brand AKZONOBEL powder coating company. The raw materials for the production of powder are all imported from abroad, and the manufacturer provides the “guarantee book” for the corresponding weathering period. The adhesion, weather resistance and peeling resistance of the aluminum powder coating layer The ability and UV resistance are strong, and the surface treatment of aluminum profiles is unmatched.
The company has 5 domestic advanced level of melting and casting production lines, using on-line addition of aluminum-titanium-boron wire on-line refining, and using online degassing and multi-stage foam ceramic filter plate purification device. Compared with traditional melting and casting equipment, the advantages are as follows:
1. Gas consumption 70-80kg/t.Al
2. Burning 1.0-.5%
3. The production efficiency is doubled, and the use of forklift feeding, mechanical slag removal, etc., effectively reduce labor intensity.
4. The temperature difference in the furnace is less than or equal to ±5 °C.
5. Adopting the direct reading spectrometer introduced in the UK, strictly in accordance with AA standard, ALCOA standard, ALCAN standard or customer specified chemical composition standard, to ensure the homogenization and crystal formation of aluminum rod melting and casting products to ensure a reasonable proportion of alloy composition, raw materials The domestic and international high-quality A00 aluminum ingots are selected from the five major aluminum plants in China. At present, the casting workshop can produce various alloy grades such as 6061, 6063, 6005, 6082, 3003, etc., to meet the needs of customers’ alloy types. The specifications of ingots that can be produced are Φ254, Φ150, Φ120, Φ105, Φ90 and so on.