Inspection equipment

Inspection equipment



Gloss tester


Salt spray test machine


Tensile testing machine


Car sunroof custom inspection tool


Roughness tester


Metallographic electron microscope


Profile end scanner


Direct Reading Spectrometer


Three coordinate measuring instrument

EnglishSpanishArabicFrenchRussian

Gloss tester

Gloss score measurements can be made by standard value/sample value display or PASS/FAIL evaluation to adjust product brightness deviation.

Salt spray test machine

The corrosive solution is sprayed with mist by compressed air, which surrounds the test sample in the test chamber.
Testing can be continuous or cyclic. The corrosion resistance of each sample is defined as the time during which the sample is corroded. The longer the time, the better the corrosion resistance. The types can be divided into: neutral salt spray test (NSS test), acetate spray (ASS), copper accelerated acetate spray test (CASS test).

Tensile testing machine

Using the static tensile force (or static pressure) generated by the tensile tester, the standard specimen is axially stretched (or compressed) while continuously measuring the varying load and the elongation of the specimen until fracture (or cracking), And based on the measured data, the relevant mechanical performance indicators are calculated.

Car sunroof custom inspection tool

Predicting high-precision gauges for the upper and lower limit values of the standard size, and quickly determining whether the sample size is within the specified range value during the production process, and improving the efficiency of on-line detection is a qualitative rather than quantitative detection method.

Roughness tester

When the stylus is directly slid over the surface to be tested, the stylus will move up and down in the direction perpendicular to the surface of the measured contour due to the peaks and valleys of the measured surface, and the movement is transmitted through the electronic device. Zoom in and then output data or graphs about roughness through a zero or other output device.

Metallographic electron microscope

The metallographic microscope observes the metallographic composition distribution of the metal structure, and can obtain certain properties of the product, such as mechanical properties and defects in the production of the product, thereby providing suggestions for production and improving certain processes.

Profile end scanner

Through the scanner, the polished sample samples are compared in a ratio of 1:1, and the preset standard reference is compared by photoelectric and image collection and processing software to quickly and accurately measure the actual size of the sample.

Direct Reading Spectrometer

Using the principle of atomic emission spectroscopy, the sample is excited into an atomic vapor by arc or spark discharge. The atom or ion in the vapor is excited to generate an emission spectrum. The emission spectrum is dispersed into the spectral band by the optical fiber into the spectrometer, according to each Element emission wavelength range determines the element content, thereby adjusting the alloy composition

Three coordinate measuring instrument

The three-axis measuring instrument has air source brake switch and micro-motion device, which can realize single-axis precision transmission. High performance data acquisition system. Used in product design, mold equipment, gear measurement, blade measurement mechanical system. Precision measurement of manufacturing, fixtures, steam mold accessories, electronic appliances, etc.

Gloss tester

Gloss score measurements can be made by standard value/sample value display or PASS/FAIL evaluation to adjust product brightness deviation.

Salt spray test machine

The corrosive solution is sprayed with mist by compressed air, which surrounds the test sample in the test chamber.
Testing can be continuous or cyclic. The corrosion resistance of each sample is defined as the time during which the sample is corroded. The longer the time, the better the corrosion resistance. The types can be divided into: neutral salt spray test (NSS test), acetate spray (ASS), copper accelerated acetate spray test (CASS test).

Tensile testing machine

Using the static tensile force (or static pressure) generated by the tensile tester, the standard specimen is axially stretched (or compressed) while continuously measuring the varying load and the elongation of the specimen until fracture (or cracking), And based on the measured data, the relevant mechanical performance indicators are calculated.

Car sunroof custom inspection tool

Predicting high-precision gauges for the upper and lower limit values of the standard size, and quickly determining whether the sample size is within the specified range value during the production process, and improving the efficiency of on-line detection is a qualitative rather than quantitative detection method.

Roughness tester

When the stylus is directly slid over the surface to be tested, the stylus will move up and down in the direction perpendicular to the surface of the measured contour due to the peaks and valleys of the measured surface, and the movement is transmitted through the electronic device. Zoom in and then output data or graphs about roughness through a zero or other output device.

Metallographic electron microscope

The metallographic microscope observes the metallographic composition distribution of the metal structure, and can obtain certain properties of the product, such as mechanical properties and defects in the production of the product, thereby providing suggestions for production and improving certain processes.

Profile end scanner

Through the scanner, the polished sample samples are compared in a ratio of 1:1, and the preset standard reference is compared by photoelectric and image collection and processing software to quickly and accurately measure the actual size of the sample.

Direct Reading Spectrometer

Using the principle of atomic emission spectroscopy, the sample is excited into an atomic vapor by arc or spark discharge. The atom or ion in the vapor is excited to generate an emission spectrum. The emission spectrum is dispersed into the spectral band by the optical fiber into the spectrometer, according to each Element emission wavelength range determines the element content, thereby adjusting the alloy composition

Three coordinate measuring instrument

The three-axis measuring instrument has air source brake switch and micro-motion device, which can realize single-axis precision transmission. High performance data acquisition system. Used in product design, mold equipment, gear measurement, blade measurement mechanical system. Precision measurement of manufacturing, fixtures, steam mold accessories, electronic appliances, etc.

Gloss tester

Gloss score measurements can be made by standard value/sample value display or PASS/FAIL evaluation to adjust product brightness deviation.

Salt spray test machine

The corrosive solution is sprayed with mist by compressed air, which surrounds the test sample in the test chamber.
Testing can be continuous or cyclic. The corrosion resistance of each sample is defined as the time during which the sample is corroded. The longer the time, the better the corrosion resistance. The types can be divided into: neutral salt spray test (NSS test), acetate spray (ASS), copper accelerated acetate spray test (CASS test).

Tensile testing machine

Using the static tensile force (or static pressure) generated by the tensile tester, the standard specimen is axially stretched (or compressed) while continuously measuring the varying load and the elongation of the specimen until fracture (or cracking), And based on the measured data, the relevant mechanical performance indicators are calculated.

Car sunroof custom inspection tool

Predicting high-precision gauges for the upper and lower limit values of the standard size, and quickly determining whether the sample size is within the specified range value during the production process, and improving the efficiency of on-line detection is a qualitative rather than quantitative detection method.

Roughness tester

When the stylus is directly slid over the surface to be tested, the stylus will move up and down in the direction perpendicular to the surface of the measured contour due to the peaks and valleys of the measured surface, and the movement is transmitted through the electronic device. Zoom in and then output data or graphs about roughness through a zero or other output device.

Metallographic electron microscope

The metallographic microscope observes the metallographic composition distribution of the metal structure, and can obtain certain properties of the product, such as mechanical properties and defects in the production of the product, thereby providing suggestions for production and improving certain processes.

Profile end scanner

Through the scanner, the polished sample samples are compared in a ratio of 1:1, and the preset standard reference is compared by photoelectric and image collection and processing software to quickly and accurately measure the actual size of the sample.

Direct Reading Spectrometer

Using the principle of atomic emission spectroscopy, the sample is excited into an atomic vapor by arc or spark discharge. The atom or ion in the vapor is excited to generate an emission spectrum. The emission spectrum is dispersed into the spectral band by the optical fiber into the spectrometer, according to each Element emission wavelength range determines the element content, thereby adjusting the alloy composition

Three coordinate measuring instrument

The three-axis measuring instrument has air source brake switch and micro-motion device, which can realize single-axis precision transmission. High performance data acquisition system. Used in product design, mold equipment, gear measurement, blade measurement mechanical system. Precision measurement of manufacturing, fixtures, steam mold accessories, electronic appliances, etc.