Home.

Mailbox Service: [email protected]

CONSTMART®

European Technology, Made In China, Serves The World.
Devote To The Leader Of Industrial Aluminum Profile Industry!

 

NOTICE BOARD

CONSTMART notification

Regular profile procurement.FAQ.
⇒ How long is the delivery time?
All the products are in stock.One day delay at latest. If you need to customize,it depends on the actual requirements.But it promises to be done within the allotted time.Products that mold open requires customer to offer and confirm the drawing,sample and quantity.In this case the time will be a little bit longer.Also it depends on your cooperation.

⇒Is there any sample copies and sample section available?
We can send sample copies and sections to you for free, you only need to provide us your company express number, then you can understand our multi-specification products and aluminum profile quality.

⇒Does your company provide mould opening service?
Sure. Just give us the section drawings you need.After confirmation by both sides,We can make the mold for you. And extruded the sample aluminum profile. After your confirmation, the product can be put into production.

Product Catalog

aluminium tubes t slot aluminum heat sink extrusion
window&door  aluminium angle custom extrusion
car parts field equipment parts field office & home field
new energy field

Part of our Product >>

Production Process >>

01 Mold  02 Casting  03 Extrusion  04 Fluorocarbon  05praying  06 Oxidation  07 Electrophoresis 08 Broken bridge   09 Injection glue   10 Warehousing

CONSTMART®

Devote To The Leader Of Industrial Aluminum Profile Industry!

aluminum round tube
aluminum round tube
aluminum tubing
aluminum round tube
previous arrowprevious arrow
next arrownext arrow
Slider

RECOMMENDATION

CONSTMART® Industrial Aluminum Profile
Product Recommendation

aluminum tent pole.   Tubes.  heat-sink.  T-Slot V-Slot Accessories.  aluminum threshold.  LED Aluminum Profile. T Track... ...

previous arrow
next arrow
PlayPause
previous arrownext arrow
Shadow
Slider

Al profile  |  extrusion |  line

Production processes


Extrusion line


Surface treatment production line


Mold design and processing


Casting production line

Inspection equipment


Gloss tester


Salt spray test machine


Direct Reading Spectrometer


Three coordinate measuring instrument

Production equipment


CNC machining center

CNC machining center


Stamping


3600T extruder

FEATURES

CONSTMART

Why don't choose best?

Technology

24 years of extruded aluminum profiles manufacturers <br> has developed and produced more than 10,000 kinds of aluminum profiles, and established technical cooperation with domestic top universities.

 Machining

CNC, stamping, rounding, welding<br>anodizing, hard oxidation, powder coating, in line with national environmental requirements.

Qualification

IATF 16949 Automotive Management System, ISO 9001 Quality Management System.

After sale

For the futures, product quality, logistics and other issues, establish a sound after-sales service process, 7X24 hours service.

Choose the best price from same quality, and choose the best quality from the same price, CONSTMART aluminum profile is your best choice!
Fields marked with an * are required




your requirements：*
For ResaleI'm a End UserFor a Recent ProjectI have drawings and need your engineers' help.


[anr_nocaptcha g-recaptcha-response]

PRODUCT DISPLAY

ASP featured Aluminum profile product display

WHY US?

Still hesitating? 20 reasons you should choose ASP®

As is known to all, China is a major exporter of mineral resources.Of course, aluminum products are also included.Therefore, in terms of price, Chinese aluminum profiles have a natural advantage in the international market.As a company with almost 20 years of history, Our products cover almost every aspect of the aluminum profile.And in addition to having a large domestic market, we also have a place in the world.North America, Western Europe, South Asia, and Africa are our major foreign markets.

But you may think since there are so many al companies in China, why I have to choose you!?

I can give you more than 20 reasons effortlessly. But consider all of you are very knowledgeable of the al profile industry, your guys know this industry very well, here I just save my words and lists 3 reasons that may attract you most.

reason 01: The most competitive price

The company's predecessor was China's state-owned first Four smelters.With the change of China's times, it is acquired by the current CEO.But it does not affect its status, resources, and influence at home.And it has become an advantage, an integration of the traditional rich state resources and the modern innovation enterprise.Those who have done business with China all know, aluminum profile import, to choose ASP, price lowest and quality is optimal!

reason 02: Efficient, high-energy and patient service team

We can't guarantee we are the biggest, but we dare say our service makes the best! Pre-sales, after-sales, designing, samples sending, engineering consulting, advance delivery, timely problem-solving ability... ...Preferential information push, advance notice, exchange rate change notification, logistics notification... ... Our customer service team are best, don't be afraid of the process, just tall what your need, then it completely frees you.

reason 03: Professional free project consulting

At home, we provide customized aluminum profile services. we have lots of project on the Aluminum profile. Big projects such as the workbench, protective fence, the landing, electrical operating table, pipeline fence and small ones like Doors and Windows extrusions profiles, curtain walls, Aluminum floor, aluminum roof.We have a professional construction team.I know that you, like most of our clients who have their own aluminum profile business and a lot of projects to do. So as long as you become our customer, you can also consult and learn our engineering skills for free.

Dear friend, go and get the quick answer now! 10000+ products are waiting for you. Large inventory, Lowest price, best quality. Looking forward to co-operating with you.

Extrusion Die service

Industrial al profile | al profile accessories
copyright by CONSTMART®

Constmart aluminum profile 2020 | All Rights Reserved.

WhatsApp chat
EnglishSpanishArabicFrenchRussian
ConstMart aluminium profile


*Custom Aluminum profile bulk manufacturing for automotive industry, hospitality industry, construction, transportation, electronics, LED lighting … Order direct from the manufacturer, Advanced Engineering, IS0 9001 Certified and save big money.
Category:

  • Basic profiles: hollow beam profile,  triangular, single radius, tubes and L-shaped profile;
  • building profiles: windows and door profile,Curtain profile;
  • industry profiles: heat sinks, pictuure frames, aluminum ladders, t slot, aluminum fance, led aluminum profile… …
    *We accept your drawings to customize the mold，You are always welcome to communicate with our designers.

We take your needs seriously. So let us know more of your, for better service.
Fields marked with an * are required





your requirements：*
For ResaleI'm a End UserFor a Recent ProjectI have drawings and need your engineers' help.


[anr_nocaptcha g-recaptcha-response]

Extrusion line

The company has 8 extrusion lines of 3600T, 1500T, 1000T, 800T, etc., equipped with a good cooling system to meet the mechanical properties of aluminum profiles under different conditions. For types, rods and tubes with high quenching sensitivity or large cross-section size and unable to achieve in-line quenching of extruders, the company is also equipped with a dedicated off-line vertical solution hardening furnace for solution hardening, and can also be used for drawing and other processes. At present, the products cover various types of sections (maximum 420mm) and T4, T5, T6, T66 and other heat treatment conditions, which can meet the individual requirements of customers.
The aluminum rod heating furnace for the extruder is all equipped with a long rod heating shearing device, which significantly improves the yield. At the same time, the company is equipped with 4 aging furnaces, the longest aging of 14.5 meters long profiles, greatly enhanced processing capacity, significantly reducing profile parking time and speeding up cycle production.

Surface treatment production line

The company has 9 anodized coloring, can handle up to 13 meters, and 2 electrophoretic painting production lines, which can handle 13 meters profiles.
The company has introduced one powder coating production line from Switzerland, one fluorine carbon production line in France and one wood grain production line. The powder has a short color change time, high powder recovery rate, uniform coating, no sag phenomenon, and a continuous, smooth coating film on the tip and rough surface of the workpiece. The curing oven temperature difference is less than or equal to ±2.5 °C, can handle profiles up to 13 meters, using high-quality raw materials and strict process control, so that the spray products maintain the same color, uniform film thickness and rich color, providing designers with a Broad design space.
The thermosetting resin powder used by the company is purchased from the world famous brand AKZONOBEL powder coating company. The raw materials for the production of powder are all imported from abroad, and the manufacturer provides the “guarantee book” for the corresponding weathering period. The adhesion, weather resistance and peeling resistance of the aluminum powder coating layer The ability and UV resistance are strong, and the surface treatment of aluminum profiles is unmatched.

Mold design and processing

The company has a complete set of mold manufacturing lines from mold design, mold manufacturing, mold heat treatment, etc. In order to improve the processing quality and manufacturing level of the mold, the company introduced two CNC machining centers and one slow wire and vacuum heat treatment furnace from Taiwan. Wait. The extrusion molds used by the company are carefully designed with high quality special mold steel at home and abroad, with advanced technology, perfect production equipment and exquisite processing methods. In order to meet the multi-series requirements of customers, computerized management has been realized from mold design, development to manufacturing. CAD/CAM mold development system is adopted in design to meet customers’ requirements of high difficulty and high precision.
In general, the mold processing flow chart is as follows:
Unloading›Roughing›Drawing›Milling›Heat treatment›Cutting wire cutting›Electrical discharge machining›Fiber work refining›Acceptance.
According to the size of the mold and the complexity of the section of the profile, it is easy to process the mold. The maximum mold diameter is 555mm. In general, the production cycle of the company’s planar mold is 5 to 10 days; the split mode is 7 to 15 days.

Casting production line

The company has 5 domestic advanced level of melting and casting production lines, using on-line addition of aluminum-titanium-boron wire on-line refining, and using online degassing and multi-stage foam ceramic filter plate purification device. Compared with traditional melting and casting equipment, the advantages are as follows:
1. Gas consumption 70-80kg/t.Al
2. Burning 1.0-.5%
3. The production efficiency is doubled, and the use of forklift feeding, mechanical slag removal, etc., effectively reduce labor intensity.
4. The temperature difference in the furnace is less than or equal to ±5 °C.
5. Adopting the direct reading spectrometer introduced in the UK, strictly in accordance with AA standard, ALCOA standard, ALCAN standard or customer specified chemical composition standard, to ensure the homogenization and crystal formation of aluminum rod melting and casting products to ensure a reasonable proportion of alloy composition, raw materials The domestic and international high-quality A00 aluminum ingots are selected from the five major aluminum plants in China. At present, the casting workshop can produce various alloy grades such as 6061, 6063, 6005, 6082, 3003, etc., to meet the needs of customers’ alloy types. The specifications of ingots that can be produced are Φ254, Φ150, Φ120, Φ105, Φ90 and so on.

Gloss tester

Gloss score measurements can be made by standard value/sample value display or PASS/FAIL evaluation to adjust product brightness deviation.

Salt spray test machine

The corrosive solution is sprayed with mist by compressed air, which surrounds the test sample in the test chamber.
Testing can be continuous or cyclic. The corrosion resistance of each sample is defined as the time during which the sample is corroded. The longer the time, the better the corrosion resistance. The types can be divided into: neutral salt spray test (NSS test), acetate spray (ASS), copper accelerated acetate spray test (CASS test).

Direct Reading Spectrometer

Using the principle of atomic emission spectroscopy, the sample is excited into an atomic vapor by arc or spark discharge. The atom or ion in the vapor is excited to generate an emission spectrum. The emission spectrum is dispersed into the spectral band by the optical fiber into the spectrometer, according to each Element emission wavelength range determines the element content, thereby adjusting the alloy composition

Three coordinate measuring instrument

The three-axis measuring instrument has air source brake switch and micro-motion device, which can realize single-axis precision transmission. High performance data acquisition system. Used in product design, mold equipment, gear measurement, blade measurement mechanical system. Precision measurement of manufacturing, fixtures, steam mold accessories, electronic appliances, etc.

CNC machining center

CNC machining center

stamping

3600T extruder,The largest profile cross-section is 420mm and the longest is 13m profile.


*Custom Aluminum profile bulk manufacturing for automotive industry, hospitality industry, construction, transportation, electronics, LED lighting … Order direct from the manufacturer, Advanced Engineering, IS0 9001 Certified and save big money.
Category:

  • Basic profiles: hollow beam profile,  triangular, single radius, tubes and L-shaped profile;
  • building profiles: windows and door profile,Curtain profile;
  • industry profiles: heat sinks, pictuure frames, aluminum ladders, t slot, aluminum fance, led aluminum profile… …
    *We accept your drawings to customize the mold，You are always welcome to communicate with our designers.

We take your needs seriously. So let us know more of your, for better service.
Fields marked with an * are required





your requirements：*
For ResaleI'm a End UserFor a Recent ProjectI have drawings and need your engineers' help.


[anr_nocaptcha g-recaptcha-response]

Extrusion line

The company has 8 extrusion lines of 3600T, 1500T, 1000T, 800T, etc., equipped with a good cooling system to meet the mechanical properties of aluminum profiles under different conditions. For types, rods and tubes with high quenching sensitivity or large cross-section size and unable to achieve in-line quenching of extruders, the company is also equipped with a dedicated off-line vertical solution hardening furnace for solution hardening, and can also be used for drawing and other processes. At present, the products cover various types of sections (maximum 420mm) and T4, T5, T6, T66 and other heat treatment conditions, which can meet the individual requirements of customers.
The aluminum rod heating furnace for the extruder is all equipped with a long rod heating shearing device, which significantly improves the yield. At the same time, the company is equipped with 4 aging furnaces, the longest aging of 14.5 meters long profiles, greatly enhanced processing capacity, significantly reducing profile parking time and speeding up cycle production.

Surface treatment production line

The company has 9 anodized coloring, can handle up to 13 meters, and 2 electrophoretic painting production lines, which can handle 13 meters profiles.
The company has introduced one powder coating production line from Switzerland, one fluorine carbon production line in France and one wood grain production line. The powder has a short color change time, high powder recovery rate, uniform coating, no sag phenomenon, and a continuous, smooth coating film on the tip and rough surface of the workpiece. The curing oven temperature difference is less than or equal to ±2.5 °C, can handle profiles up to 13 meters, using high-quality raw materials and strict process control, so that the spray products maintain the same color, uniform film thickness and rich color, providing designers with a Broad design space.
The thermosetting resin powder used by the company is purchased from the world famous brand AKZONOBEL powder coating company. The raw materials for the production of powder are all imported from abroad, and the manufacturer provides the “guarantee book” for the corresponding weathering period. The adhesion, weather resistance and peeling resistance of the aluminum powder coating layer The ability and UV resistance are strong, and the surface treatment of aluminum profiles is unmatched.

Mold design and processing

The company has a complete set of mold manufacturing lines from mold design, mold manufacturing, mold heat treatment, etc. In order to improve the processing quality and manufacturing level of the mold, the company introduced two CNC machining centers and one slow wire and vacuum heat treatment furnace from Taiwan. Wait. The extrusion molds used by the company are carefully designed with high quality special mold steel at home and abroad, with advanced technology, perfect production equipment and exquisite processing methods. In order to meet the multi-series requirements of customers, computerized management has been realized from mold design, development to manufacturing. CAD/CAM mold development system is adopted in design to meet customers’ requirements of high difficulty and high precision.
In general, the mold processing flow chart is as follows:
Unloading›Roughing›Drawing›Milling›Heat treatment›Cutting wire cutting›Electrical discharge machining›Fiber work refining›Acceptance.
According to the size of the mold and the complexity of the section of the profile, it is easy to process the mold. The maximum mold diameter is 555mm. In general, the production cycle of the company’s planar mold is 5 to 10 days; the split mode is 7 to 15 days.

Casting production line

The company has 5 domestic advanced level of melting and casting production lines, using on-line addition of aluminum-titanium-boron wire on-line refining, and using online degassing and multi-stage foam ceramic filter plate purification device. Compared with traditional melting and casting equipment, the advantages are as follows:
1. Gas consumption 70-80kg/t.Al
2. Burning 1.0-.5%
3. The production efficiency is doubled, and the use of forklift feeding, mechanical slag removal, etc., effectively reduce labor intensity.
4. The temperature difference in the furnace is less than or equal to ±5 °C.
5. Adopting the direct reading spectrometer introduced in the UK, strictly in accordance with AA standard, ALCOA standard, ALCAN standard or customer specified chemical composition standard, to ensure the homogenization and crystal formation of aluminum rod melting and casting products to ensure a reasonable proportion of alloy composition, raw materials The domestic and international high-quality A00 aluminum ingots are selected from the five major aluminum plants in China. At present, the casting workshop can produce various alloy grades such as 6061, 6063, 6005, 6082, 3003, etc., to meet the needs of customers’ alloy types. The specifications of ingots that can be produced are Φ254, Φ150, Φ120, Φ105, Φ90 and so on.

Gloss tester

Gloss score measurements can be made by standard value/sample value display or PASS/FAIL evaluation to adjust product brightness deviation.

Salt spray test machine

The corrosive solution is sprayed with mist by compressed air, which surrounds the test sample in the test chamber.
Testing can be continuous or cyclic. The corrosion resistance of each sample is defined as the time during which the sample is corroded. The longer the time, the better the corrosion resistance. The types can be divided into: neutral salt spray test (NSS test), acetate spray (ASS), copper accelerated acetate spray test (CASS test).

Direct Reading Spectrometer

Using the principle of atomic emission spectroscopy, the sample is excited into an atomic vapor by arc or spark discharge. The atom or ion in the vapor is excited to generate an emission spectrum. The emission spectrum is dispersed into the spectral band by the optical fiber into the spectrometer, according to each Element emission wavelength range determines the element content, thereby adjusting the alloy composition

Three coordinate measuring instrument

The three-axis measuring instrument has air source brake switch and micro-motion device, which can realize single-axis precision transmission. High performance data acquisition system. Used in product design, mold equipment, gear measurement, blade measurement mechanical system. Precision measurement of manufacturing, fixtures, steam mold accessories, electronic appliances, etc.

CNC machining center

CNC machining center

stamping

3600T extruder,The largest profile cross-section is 420mm and the longest is 13m profile.


*Custom Aluminum profile bulk manufacturing for automotive industry, hospitality industry, construction, transportation, electronics, LED lighting … Order direct from the manufacturer, Advanced Engineering, IS0 9001 Certified and save big money.
Category:

  • Basic profiles: hollow beam profile,  triangular, single radius, tubes and L-shaped profile;
  • building profiles: windows and door profile,Curtain profile;
  • industry profiles: heat sinks, pictuure frames, aluminum ladders, t slot, aluminum fance, led aluminum profile… …
    *We accept your drawings to customize the mold，You are always welcome to communicate with our designers.

We take your needs seriously. So let us know more of your, for better service.
Fields marked with an * are required





your requirements：*
For ResaleI'm a End UserFor a Recent ProjectI have drawings and need your engineers' help.


[anr_nocaptcha g-recaptcha-response]

Extrusion line

The company has 8 extrusion lines of 3600T, 1500T, 1000T, 800T, etc., equipped with a good cooling system to meet the mechanical properties of aluminum profiles under different conditions. For types, rods and tubes with high quenching sensitivity or large cross-section size and unable to achieve in-line quenching of extruders, the company is also equipped with a dedicated off-line vertical solution hardening furnace for solution hardening, and can also be used for drawing and other processes. At present, the products cover various types of sections (maximum 420mm) and T4, T5, T6, T66 and other heat treatment conditions, which can meet the individual requirements of customers.
The aluminum rod heating furnace for the extruder is all equipped with a long rod heating shearing device, which significantly improves the yield. At the same time, the company is equipped with 4 aging furnaces, the longest aging of 14.5 meters long profiles, greatly enhanced processing capacity, significantly reducing profile parking time and speeding up cycle production.

Surface treatment production line

The company has 9 anodized coloring, can handle up to 13 meters, and 2 electrophoretic painting production lines, which can handle 13 meters profiles.
The company has introduced one powder coating production line from Switzerland, one fluorine carbon production line in France and one wood grain production line. The powder has a short color change time, high powder recovery rate, uniform coating, no sag phenomenon, and a continuous, smooth coating film on the tip and rough surface of the workpiece. The curing oven temperature difference is less than or equal to ±2.5 °C, can handle profiles up to 13 meters, using high-quality raw materials and strict process control, so that the spray products maintain the same color, uniform film thickness and rich color, providing designers with a Broad design space.
The thermosetting resin powder used by the company is purchased from the world famous brand AKZONOBEL powder coating company. The raw materials for the production of powder are all imported from abroad, and the manufacturer provides the “guarantee book” for the corresponding weathering period. The adhesion, weather resistance and peeling resistance of the aluminum powder coating layer The ability and UV resistance are strong, and the surface treatment of aluminum profiles is unmatched.

Mold design and processing

The company has a complete set of mold manufacturing lines from mold design, mold manufacturing, mold heat treatment, etc. In order to improve the processing quality and manufacturing level of the mold, the company introduced two CNC machining centers and one slow wire and vacuum heat treatment furnace from Taiwan. Wait. The extrusion molds used by the company are carefully designed with high quality special mold steel at home and abroad, with advanced technology, perfect production equipment and exquisite processing methods. In order to meet the multi-series requirements of customers, computerized management has been realized from mold design, development to manufacturing. CAD/CAM mold development system is adopted in design to meet customers’ requirements of high difficulty and high precision.
In general, the mold processing flow chart is as follows:
Unloading›Roughing›Drawing›Milling›Heat treatment›Cutting wire cutting›Electrical discharge machining›Fiber work refining›Acceptance.
According to the size of the mold and the complexity of the section of the profile, it is easy to process the mold. The maximum mold diameter is 555mm. In general, the production cycle of the company’s planar mold is 5 to 10 days; the split mode is 7 to 15 days.

Casting production line

The company has 5 domestic advanced level of melting and casting production lines, using on-line addition of aluminum-titanium-boron wire on-line refining, and using online degassing and multi-stage foam ceramic filter plate purification device. Compared with traditional melting and casting equipment, the advantages are as follows:
1. Gas consumption 70-80kg/t.Al
2. Burning 1.0-.5%
3. The production efficiency is doubled, and the use of forklift feeding, mechanical slag removal, etc., effectively reduce labor intensity.
4. The temperature difference in the furnace is less than or equal to ±5 °C.
5. Adopting the direct reading spectrometer introduced in the UK, strictly in accordance with AA standard, ALCOA standard, ALCAN standard or customer specified chemical composition standard, to ensure the homogenization and crystal formation of aluminum rod melting and casting products to ensure a reasonable proportion of alloy composition, raw materials The domestic and international high-quality A00 aluminum ingots are selected from the five major aluminum plants in China. At present, the casting workshop can produce various alloy grades such as 6061, 6063, 6005, 6082, 3003, etc., to meet the needs of customers’ alloy types. The specifications of ingots that can be produced are Φ254, Φ150, Φ120, Φ105, Φ90 and so on.

Gloss tester

Gloss score measurements can be made by standard value/sample value display or PASS/FAIL evaluation to adjust product brightness deviation.

Salt spray test machine

The corrosive solution is sprayed with mist by compressed air, which surrounds the test sample in the test chamber.
Testing can be continuous or cyclic. The corrosion resistance of each sample is defined as the time during which the sample is corroded. The longer the time, the better the corrosion resistance. The types can be divided into: neutral salt spray test (NSS test), acetate spray (ASS), copper accelerated acetate spray test (CASS test).

Direct Reading Spectrometer

Using the principle of atomic emission spectroscopy, the sample is excited into an atomic vapor by arc or spark discharge. The atom or ion in the vapor is excited to generate an emission spectrum. The emission spectrum is dispersed into the spectral band by the optical fiber into the spectrometer, according to each Element emission wavelength range determines the element content, thereby adjusting the alloy composition

Three coordinate measuring instrument

The three-axis measuring instrument has air source brake switch and micro-motion device, which can realize single-axis precision transmission. High performance data acquisition system. Used in product design, mold equipment, gear measurement, blade measurement mechanical system. Precision measurement of manufacturing, fixtures, steam mold accessories, electronic appliances, etc.

CNC machining center

CNC machining center

stamping

3600T extruder,The largest profile cross-section is 420mm and the longest is 13m profile.